5-phase stepper motor 42/60series

The stepper motor is a special motor specially designed for accurate control of position and speed. The biggest characteristic of stepper motor is “digital”. For each pulse signal from the controller, the stepper motor driven by its drive runs at a fixed angle (“one” step for short), as shown in the following figure.

The We-iTech series stepper motor is designed based on the Cz optimized magnetic circuit and adopts stator and rotator materials of high magnetic density, featuring a high energy efficiency.

Usage precautions of stepper motor:

• The maximum rotation speed of the stepper motor shall be 600 to 700 rpm.

• The low speed resonance region of the stepper motor is close to 100 rpm and 200 rpm. (The first resonance region is about 100rpm The second resonance region is about 200 rpm)

• The 8-wire motor has two connection methods, series and parallel. Please connect according to the manual or the motor label. (Series connection is adopted in the low-speed low-torque application Parallel connection is adopted in the high-speed application)

• If the motor shakes when running or waggles when stopped, there must be the interia matching problem, reducer shall be considered.

• If the stepper motor cannot start, please check the connection, the micro-stepping drive and the speed reduction setting of system.

• For stepper motors with brakes, please note the impact of the brake heating on the system.